Industrial Fastener · Anchors Series
Toggle Bolt
A toggle bolt has a spring-loaded wing (toggle) that folds flat to pass through a hole, then springs open behind the wall. As the bolt is tightened, the toggle pulls against the back of the wall, creating high pull-out resistance in hollow constructions.
Product Overview
Toggle Bolt sourcing essentials
A toggle bolt has a spring-loaded wing (toggle) that folds flat to pass through a hole, then springs open behind the wall. As the bolt is tightened, the toggle pulls against the back of the wall, creating high pull-out resistance in hollow constructions.
Project or drawing specification
Zinc-plated steel, Stainless
A toggle bolt has a spring-loaded wing (toggle) that folds flat to pass through a hole, then springs open behind the wall. As the bolt is...
Inspection records, lot labels, certificate options, and destination-ready packing.
Technical Data
Specification range
Final dimensions, mechanical properties, finish, and packing are confirmed against the RFQ and applicable standard.
| Forms | Standard toggle (machine screw + spring wing), Snap-toggle (plastic strap + metal channel) |
|---|---|
| Bolt Size | M3 – M10 (#6 – 3/8") |
| Wall Thickness | Suitable for hollow walls; minimum cavity required |
| Material | Zinc-plated steel, Stainless |
Common surface finishes
Select an option to review its sourcing note. Exact coating system, thickness, and corrosion requirement are confirmed with the order.
Quality Control
Checked before consolidation and export
Each order is matched to the specified standard and verified at practical control points before shipment.
RFQ confirmation
Standard, size, grade, pitch, finish, certificates, packing, and destination are locked before production.
Lot verification
Critical dimensions, thread fit, markings, finish appearance, and packing labels are sampled and recorded.
Shipment approval
Photos and required reports are organized before consolidated loading and export documentation.
Buyer Questions
Frequently asked questions
What's the difference between a standard toggle and a snap-toggle?
Standard toggle: the spring wing must be threaded onto the bolt before insertion, and falls into the cavity if the bolt is removed. Snap-toggle: a plastic strap holds the metal channel against the back of the wall — the bolt can be removed and reinstalled without dropping the toggle into the cavity. Snap-toggles are generally easier to install in finished walls but slightly more expensive.
Ready to quote Toggle Bolt?
Send the standard, size, grade, finish, quantity, packing requirement, and destination. Availability and lead time are confirmed with the inquiry.